MORE THAN A PUMP

Full range of intelligent, high-efficiency circulator pumps for heating, cooling, boiler, heat pump, solar thermal systems, domestic hot water applications


HET Domestic Type

Stay with us for full range of hot water circulator pumps

circulator
Supply voltage:
Flow rate, Qmax:
Pump head, Hmax:
Liquid temperature:
System pressure, Pmax:
Power Range:
Ambient temperature:
EEI:
Enclosure class:
Insulation class:
   1 x 230 V – 50/60 Hz
   3.7 m3/h
   7 m
   +2°C to +110°C (TF 110)
   1.0 MPa/10 bar
   5-47 W
   0°C to +40°C
   ≤ 0.20
   IP 44
   F
» Exceeding benchmark level of the Ecodesign Requirements for 2015(ErP) with EEI ≤ 0.20
» Providing energy savings and comfort level
» Automatic and continuous detection of optimal duty point by AUTO
» Automatic night setback function
» High safety – built-in electrical and thermal protection of the pump
» Self-venting pump housing
» LED display for indication of power and fault codes
» Fault prompt function
» Low noise level
» Based on 500,000 times test in extreme conditions

Key Features

   Constant speed mode

Three constant speed modes for constant flow applications

   Autoadapt mode

• The factory setting, AUTO, analyzes the heating system and automatically adjusts the pump setting to meet the heating requirement. The result is optimum comfort and a minimum of energy consumption.
• AUTO can be used in 80% of the heating system

   Easy operation

Intuitive one-touch operation makes control mode selection simple

pic
   Proportional pressure mode

• If the proportional pressure mode is selected, the differential pressure varies proportionally with the flow, i.e. higher flow means higher differential pressure
• Proportional pressure is the preferred choice for one-string systems with high flow variation
• Proportional pressure curve (high and low)

   Everything under control

9-segment power display provides an easy overview of all that is going on in the pump

   Night mode

The night mode reduces the power consumption to a minimum with power-saving features.

   Constant pressure mode

• The pump maintains constant pressure regardless of the flow
• The preferred operation mode for under floor heating and 2 string systems with low flow variation
• Constant pressure curves (low and high)

Technical Data


Type Max. volume flow
Qmax
Max. delivery head
Hmax
Energy efficiency
index (EEI)
Thread Threaded pipe
union
Rated
pressure
Overall
length
Mains
connection
Gross
weight
HET-RS15/4 1.8 m³/h 4 m ≤ 0.20 G 1" G 3/4" 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HET-RS25/4 2.6 m³/h 4 m ≤ 0.20 G 1 1/2" G 1" 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HET-RS32/4 3 m³/h 4 m ≤ 0.20 G 2" G 1 1/4" 10 bar 180 mm 1~230 V,
50/60 Hz
2.5 kg
HET-RS15/5 2.3 m³/h 5 m ≤ 0.23 G 1" G 3/4" 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HET-RS25/5 3.1 m³/h 5 m ≤ 0.20 G 1 1/2" G 1" 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HET-RS32/5 3.4 m³/h 5 m ≤ 0.23 G 2" G 1 1/4" 10 bar 180 mm 1~230 V,
50/60 Hz
2.5 kg
HET-RS15/6 2.4 m³/h 6 m ≤ 0.20 G 1" G 3/4" 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HET-RS25/6 3.6 m³/h 6 m ≤ 0.20 G 1 1/2" G 1" 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HET-RS32/6 3.6 m³/h 6 m ≤ 0.20 G 2" G 1 1/4" 10 bar 180 mm 1~230 V,
50/60 Hz
2.5 kg
HET-RS15/7 2.7 m³/h 7 m ≤ 0.20 G 1" G 3/4" 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HET-RS25/7 3.7 m³/h 7 m ≤ 0.20 G 1 1/2" G 1" 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HET-RS32/7 3.7 m³/h 7 m ≤ 0.20 G 2" G 1 1/4" 10 bar 180 mm 1~230 V,
50/60 Hz
2.5 kg

Measurements

pic pic
Type L1
(mm)
L2
(mm)
B1
(mm)
B2
(mm)
H1
(mm)
H2
(mm)
G
(inch)
Material of rear housing
HET-RS15/x 130 106 96 46 165 136 1" cast iron/brass/stainless steel
HET-RS25/x 130/180 106 96 46 165 136 1 1/2" cast iron/brass
HET-RS32/x 180 106 96 46 165 136 2" cast iron

Curves

pic
pic
pic
pic
pic
pic
pic
pic
pic
pic
pic
pic